Mcz Stub User Manual download pdf (Page 45)

11-MAINTENANCE AND CLEANING

All the cleaning operations of all parts must be performed with a completely cold product.

CLEANING PERFORMED BY THE USER

CLEANING THE GLASS

The glass can be cleaned with specic products (see our price list), with a cloth soaked in a water and ammonia solution or a little white

ash and a sheet of newspaper. Any soot build-up and dirt will prolong cleaning time.

Do not spray the product onto the painted parts or onto the door gaskets (ceramic bre cord).

The ceramic glass installed on the manufacturer's products have a heat resistance of approximately 750 °C and are

tested and checked before and after assembly to check for any cracks, bubbles and swelling.

Despite the high resistance to temperatures, the glass is in any case a fragile element and so it is advisable to handle

the door carefully without slamming it or forcing it. Since it is not a exible element, the glass may break.

Moreover, this type of glass does not shatter or burst and should it break, for the above reasons, only a crack will

form.

CLEANING THE UPPER CALORITE DEFLECTORS

They do not require any special care. Even though the internal deectors of the combustion rebox are made of eective yet porous

material, they must be replaced after prolonged use due to wear, damage caused when their thickness is reduced to half or broken.

CLEANING THE ASH

This task must be performed with the stove turned o; we recommend you clean the ash tray thoroughly to ensure correct combustion.

Open the door, remove the grille and the ash pan using the supplied cold handle.

Clean also any ash deposits in the pan compartment.

Hot ashes must not be stored outside unsupervised or thrown into the rubbish bin. Allow it to cool in the open air in a

metal container.

1 2 ... 40 41 42 43 44 45 46 47 48

No comments

Mcz Stub User Manual Page 45