Mcz Stub User Manual

WOOD-BURNING STOVESTUB INSTALLATION AND USER GUIDE ENTranslation of original instructions

82-INSTALLATION INSTRUCTIONSOUTDOOR AIR INLETDrill a hole on the outer wall close to the product with a minimum section of 100 cm² (13 cm in diameter

92-INSTALLATION INSTRUCTIONSCONNECTING THE PRODUCT TO THE CHIMNEYThe smoke outlet pipe is designed by the company for the smoke to be expelled towards

102-INSTALLATION INSTRUCTIONSTOP HOLE COVER AND REAR SMOKE OUTLET FITTING ACCESSORYGiven the option of moving the rear smoke outlet of the STUB Over

ABCD112-INSTALLATION INSTRUCTIONSCHIMNEYThe chimney is the fundamental element for smoke expulsion and must therefore comply with the following requ

122-INSTALLATION INSTRUCTIONSEXAMPLES OF CHIMNEYSAISI 316 steel product with double chamber insulated with ceramic bre or similar material, resis

AB1 mt0,5 mt132-INSTALLATION INSTRUCTIONSCHIMNEYPOTOften, if this factor is underestimated it hinders smooth "product system" operation.Th

142-INSTALLATION INSTRUCTIONSIn the case of paired products, the solid combustibility or upper storey chimneypot must be at least 50 cm higher than t

24.554.5100.5490554.51145ø514236ø146153-DIMENSIONS AND TECHNICAL CHARACTERISTICSSTUFA STUB NATURAL WITH UPPER SMOKE OUTLETTechnical Dept. - All rights

ø514235.5ø14624.51145554.5490100.554.5AB352987163-DIMENSIONS AND TECHNICAL CHARACTERISTICSSTUFA STUB NATURAL WITH REAR SMOKE OUTLET AND REAR COMBUSTIO

AB527.554.5554.549024.5ø514235.5ø14612803521572173-DIMENSIONS AND TECHNICAL CHARACTERISTICSSTUFA STUB OVERNIGHT WITH REAR SMOKE OUTLET AND REAR COMBUS

IITABLE OF CONTENTSINTRODUCTION ... 11-WARNINGS AND WARRANT

236ø514ø14624.5554.51572490527.554.5183-DIMENSIONS AND TECHNICAL CHARACTERISTICSSTUFA STUB OVERNIGHT WITH UPPER SMOKE OUTLET

193-DIMENSIONS AND TECHNICAL CHARACTERISTICSTECHNICAL CHARACTERISTICS STUB NATURAL/OVERNIGHTType of fuel WoodHourly consumption 2.0 kg/h – 0.9 kg/h*Re

AB204-INSTALLATION AND ASSEMBLYIMPORTANT!The product must be installed and connected to the product by a qualied technician or competent personnel in

AB214-INSTALLATION AND ASSEMBLYThe product must always be handled in a vertical position and solely with a cart. Pay particular attention to the door

1x4xABC20X1X1X1X2X13X2XLMDEF GHI1X1X225-CERAMIC KIT PARTSSTUB VERSION WITH TOP SMOKE OUTLETA BOTTOM CERAMIC PANEL G FRAME FOR LEFT SIDE CERAMIC PANEL

1x4xABC20X1X1X1X2X13X4XL MDEFGHI1X1X1XN235-CERAMIC KIT PARTSSTUB VERSION WITH REAR COMBUSTION AIR AND/OR REAR SMOKE OUTLETA BOTTOM CERAMIC PANEL G FR

1x1xABD6xC32X2X17X2XLGFH I1XE2X1X1XNO1X4XM245-CERAMIC KIT PARTSSTUB OVERNIGHT VERSION WITH TOP SMOKE OUTLET AND NONDUCTED COMBUSTION AIRA BOTTOM CERA

1x1xABD6xC32X2X17X4XLGFH I1XE2X1X1XNO1X4XMP255-CERAMIC KIT PARTSSTUB OVERNIGHT VERSION WITH REAR DUCTED COMBUSTION AIR AND REAR SMOKE OUTLETA BOTTOM C

1X2X 1X 1X5X5XA5A6A3A2A1A4266-STORAGE TANK PARTS AND ASSEMBLYThe storage tank parts are provided with the ceramic kit of the STUB OVERNIGHT stove: CLA

A6A6A6A6A6A5A1A3A4A6A1A1A5A2A3276-STORAGE TANK PARTS AND ASSEMBLYSIDEVIEWFRONTVIEW REARVIEWTechnical Dept. - All rights reserved - Reproduction is

1INTRODUCTIONDear Customer,Thank you for having chosen a product from our Wood-burning range.Products built with Oyster technology, where appropriatel

DDAECC287-STUB COATING ASSEMBLYCOATING ASSEMBLYInstallation of the ceramic side panels does not present any particolar diculties. The main warning is

H297-STUB COATING ASSEMBLYTechnical Dept. - All rights reserved - Reproduction is prohibitedIMPORTANT: If the holes used to secure the central panel “

GFBBBBS307-STUB COATING ASSEMBLYFIG.5SIDEPANELSASSEMBLYFIG.6SIDEPANELSASSEMBLYBefore going ahead with the installation of the side panels, it is

IIINII317-STUB COATING ASSEMBLYstove and secure them at the top with the screw “I” supplied (FIG.7)Rear panel assembly in the event of rear air outlet

AFDDEE328-STUB OVERNIGHT COATING ASSEMBLYSTUB OVERNIGHT VERSION WITH REAR OR TOP SMOKE OUTLET.Central panel assembly.First of all take the two side pr

H338-STUB OVERNIGHT COATING ASSEMBLYIMPORTANT: If the holes used to secure the central panel “A” do not match the ones of the side proles, try to loo

COCCNCCCS348-STUB OVERNIGHT COATING ASSEMBLYFIG.5SIDEPANELSASSEMBLYFIG.6SIDEPANELSASSEMBLYBefore going ahead with the installation of the side p

IIIPII358-STUB OVERNIGHT COATING ASSEMBLYAt the top, x the panels to the structure with the screws “I” supplied (FIG.7).Rear panel assembly in the ev

CCMLMSSSSTMSSSSSL369 - ASSEMBLING THE TOPSTUB STOVE WITH UPPER OR REAR AIR OUTLETPlace the top support “M” on the stove, make sure the pins S undernea

KM379 - ASSEMBLING THE TOPTechnical Dept. - All rights reserved - Reproduction is prohibitedK DETAIL

21-WARNINGS AND WARRANTY CONDITIONSSAFETY PRECAUTIONS • Installation, functional verication and maintenance must only be performed by qualied or au

MMMMGSSSSCLGLG389 - ASSEMBLING THE TOPSTUB OVERNIGHT STOVE WITH TOP OR REAR SMOKE OUTLETFix top support “G” to the structure via the four screws “M”.

3910-OPERATIONSTARTUP PRECAUTIONSMake sure you have read and fully understood the contents of this instruction manual.Remove all components that coul

4010-OPERATIONA high percentage of moisture causes condensation in the smoke duct, thereby causing an alteration to the draught and generating smoke a

4110-OPERATIONADJUSTING THE AIR WITH THE PUSHPULL SYSTEMPress the air adjustment knob, which will slightly emerge from its seat thanks to a spring an

4210-OPERATIONFIRST IGNITIONA NOTE REGARDING PAINT EXHALATIONIt is recommended to air the room before the rst start-up to evacuate any smells and/or

4311-MAINTENANCE AND CLEANINGAll the cleaning operations of all parts must be performed with a completely cold product.CLEANING PERFORMED BY THE USERC

4411-MAINTENANCE AND CLEANINGCLEANING STAINLESS STEEL AND SATINFINISHED SURFACESUsually these surfaces do not need any special treatment and avoiding

Technical Dept. - All rights reserved - Reproduction is prohibited

15/01/2013REV.18901227200MCZ GROUP S.p.A.Via La Croce n°833074 Vigonovo di Fontanafredda (PN) – ITALYTelephone: 0434/599599 r.a.Fax: 0434/599598Intern

31-WARNINGS AND WARRANTY CONDITIONSINFORMATION• Please contact the retailer or qualied personnel authorised by the company to resolve a problem.• C

41-WARNINGS AND WARRANTY CONDITIONSINTERVENTION REQUESTThe company declines all liability if the product and any other accessory is used incorrectly o

52-INSTALLATION INSTRUCTIONSThe requirements stipulated in this chapter refer to the regulations of the Italian installation Standard UNI 10683. In an

BA62-INSTALLATION INSTRUCTIONSSAFE DISTANCESSTUB OVERNIGHTNon-ammable walls Flammable wallsA = 5 cmB = 15 cmA = 5 cmB = 25 cmIf particularly delicate

72-INSTALLATION INSTRUCTIONSREARVIEWOFTHEPRODUCT.1)COMBUSTIONAIRINLETCONNECTING THE COMBUSTION AIR INLET PIPEThe combustion air inlet does not