Mcz Philo User Manual download pdf (Page 19)

PELLET STOVES Chapter 3

USE AND MAINTENANCE MANUAL

page 19

Piedino J

The body of the stove or unit must always be handled vertically and

only using trolleys. Pay particular attention to the door and its glazing

to protect them from mechanical knocks which would compromise their

proper working order.

In all cases, appliances must be handled with care. If possible, unwrap

the stove near the chosen place of installation.

The materials making up the packaging are neither toxic nor harmful

and, as such, require no special disposal measures.

Storage, disposal and any recycling is therefore the responsibility of the

end user and must be carried out in compliance with the applicable

laws in force.

Do not store the unit and claddings without the associated packaging.

Position the stove without the cladding and then proceed with the

connection of the flue pipe. Once the connections have been made, fit

the cladding (ceramic or steel-sided).

If you have to connect the stove to an outlet pipe that crosses the rear

wall (to flow into the flue pipe) take great care not to force the mouth.

Adjust the 4 feet (J) to find the correct level so that the smoke outlet

and pipe are coaxial. The feet must be adjusted without the steel or

ceramic sides as the adjustment occurs inside the cladding.

If the smoke outlet of the stove is forced or used

inappropriately to lift or position it the function of

the outlet will be irreparably compromised.

1. Rotating the feet clockwise

lowers the stove

2. Rotating the feet

anticlockwise raises the

stove

Foot J

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 45 46

No comments

Mcz Philo User Manual Page 19