Mcz Cap NATURAL User Manual download pdf (Page 62)

13-SAFETY DEVICES

SAFETY DEVICES

The product is tted with the following safety devices.

SMOKE TEMPERATURE PROBE

It detects the temperature of the smoke, thereby enabling start-up or stopping the product when the temperature drops below the preset

value.

PELLET HOPPER TEMPERATURE PROBE

If the temperature exceeds the preset safety value, it immediately stops the product, which must cool down before the stove is restarted.

ELECTRICAL SAFETY

The product is protected against power surges by a general fuse located in the control panel on the back. Other fuses that protect the

electronic boards are found on the latter.

SMOKE FAN BREAKAGE

If the fan stops, the circuit board promptly blocks the supply of pellets and the alarm is displayed.

GEAR MOTOR BREAKAGE

If the gear motor stops, the product switches o and the relative alarm is signalled.

TEMPORARY POWER CUT

If a power cut occurs during operation, the product automatically sets itself in cooling mode when the power is restored and then it

restarts.

FAILED START-UP

If no ame lights during start-up, the product will go into alarm conditions.

TAMPERING WITH THE SAFETY DEVICES IS PROHIBITED.

It is possible to relight the product and therefore restore the automatic operation of the probe only after having eliminated the cause of

the intervention of the safety system. This manual will help you understand which anomaly has occurred, and explain how to intervene

according to the alarm message displayed on the appliance.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 75 76

No comments

Mcz Cap NATURAL User Manual Page 62